| Volumes Volume 6 Contents of Current Session |
www.adv-radio-sci.net/6/279/2008/
doi:10.5194/ars-6-279-2008
© Author(s) 2008. This work is distributed
under the Creative Commons Attribution 3.0 License.
Detection of transient disturbing signals on PC boards
Institute of Electrical Engineering and Measurement Science, University of Hannover, Hannover, Germany
Abstract. This paper shows a possibility to visualize signal propagation in electronic circuits. Instead of using various galvanic measurement points all over the circuit, a test method is shown which measures the radiated field of the printed circuit board. By use of a 2-dimensional positionable field probe it is possible to get an overview over the signals running on the different parts of the PCB. In order to measure transient disturbing signals and distinguish them from normal device operation, problems of probe design and triggering need to be discussed.
Full Article in PDF (PDF, 2929 KB)
Citation: Korte, S., Döring, O., and Garbe, H.: Detection of transient disturbing signals on PC boards, Adv. Radio Sci., 6, 279-284, doi:10.5194/ars-6-279-2008, 2008. Bibtex EndNote Reference Manager XML
