<?xml version="1.0" encoding="utf-8" standalone="no"?>
<!DOCTYPE article SYSTEM "http://www.adv-radio-sci.net/inc/ars/copernicus.dtd">
<article language="en">
	<journal>
		<journal_title>Advances in Radio Science</journal_title>
		<journal_url>www.adv-radio-sci.net</journal_url>
		<issn>1684-9965</issn>
		<eissn>1684-9973</eissn>
		<volume_number>3</volume_number>
		<volume_title>Kleinheubacher Berichte 2004</volume_title>
		<publication_year>2005</publication_year>
	</journal>
	<doi>10.5194/ars-3-299-2005</doi>
	<article_url>http://www.adv-radio-sci.net/3/299/2005/</article_url>
	<abstract_html>http://www.adv-radio-sci.net/3/299/2005/ars-3-299-2005.html</abstract_html>
	<fulltext_pdf>http://www.adv-radio-sci.net/3/299/2005/ars-3-299-2005.pdf</fulltext_pdf>
	<start_page>299</start_page>
	<end_page>303</end_page>
	<publication_date>2005-05-13</publication_date>
	<article_title content_type="html">Design of a LNA in the frequency band 1.8-2.2GHz in 0.13μm CMOS Technology</article_title>
	<authors>
		<author numeration="1" affiliations="1">
			<name>E. Di Gioia</name>
		</author>
		<author numeration="2" affiliations="1">
			<name>C. Hermann</name>
		</author>
		<author numeration="3" affiliations="1">
			<name>H. Klar</name>
		</author>
	</authors>
	<affiliations>
		<affiliation numeration="1" content_type="html">Technical University of Berlin, Institute of Microelectronics, Einsteinufer 17, 10587 Berlin, Germany</affiliation>
	</affiliations>
	<abstract content_type="html">The subject of this work is a low noise amplifier (LNA), operating in the
frequency range 1.8-2.1GHz. The CMOS 0.13μm technology is used
in respect to the low cost of the final device. Among the specifications, a
variable gain and an adjustable working frequency are required. In
particular, four different working modes are provided: 1.8, 1.9 and 2.1GHz
high gain and 2.1GHz low gain. The amplifier is designed to be used as first
stage of a receiver for mobile telephony. For this reason low power
consumption is taken into consideration (low supply voltage and low drain
currents). A simple digital circuit, integrated on-chip, is used to select
the operating mode of the LNA by means of two input pins. A Noise figure of
1dB is obtained with a supply voltage of 0.8V.</abstract>
	<references>
	</references>
</article>

