| Volumes Volume 2 Contents of Current Session |
www.adv-radio-sci.net/2/33/2004/
doi:10.5194/ars-2-33-2004
© Author(s) 2004. This work is licensed
under a Creative Commons License.
Screening attenuation of coaxial cables determined in GTEM-cells
Grundlagen der Elektrotechnik und Messtechnik, Universität Hannover, Appelstr. 9A, D-30167 Hannover, Germany
Abstract. This paper describes the determination of the screening attenuation with a GTEM cell. An analytical part gives the link between the voltage at the cell port and the total radiated power. The next section investigates the optimal cable setup in the cell. With a measurement of the common mode current on the cable and a simulation of the radiation resistance the loop antenna characteristic of the cable setup could be verified. It is shown that the use of ferrit cores decrease the difference between the maximum and the minimum screening attenuation. The determination of great screening attenuation could be improved with the use of N-type measurement cables. A comparison between this GTEM cell method and the standard methods shows a good agreement.
Full Article in PDF (PDF, 4966 KB)
Citation: Knobloch, A. and Garbe, H.: Screening attenuation of coaxial cables determined in GTEM-cells, Adv. Radio Sci., 2, 33-38, doi:10.5194/ars-2-33-2004, 2004. Bibtex EndNote Reference Manager XML
